How to write a Distribution Specialist CV that gets interviews

Parcel shipping is for small packages (typically under 30kg, up to 50 inches) handled by parcel carriers (Royal Mail, DPD, Parcelforce); cost per parcel but flexible, ideal for small orders going to consumers. LTL (less than truckload) is for shipments too large for parcel but not enough to fill a truck (typically 500-20,000 kg); cost per kilogram, linehaul charges, but can be expensive for light, bulky items. FTL (full truckload) is for 20-25 tonnes filling a truck; best cost per unit but requires volume to justify. Decision factors: (1) Shipment weight and volume—parcel for <30kg, LTL for medium, FTL for 20t+. (2) Destination—parcel fast for consumer delivery, FTL economical for B2B warehouses. (3) Frequency—parcel daily, LTL 2-3 x week, FTL can be scheduled. (4) Cost sensitivity—FTL cheapest per tonne, parcel most expensive but flexible. Modern logistics often mixes: small orders consolidated in parcel, medium orders LTL, large orders FTL. Your role is to choose the right option based on customer needs and cost efficiency.

Post-Brexit, UK exports to EU now require additional documentation: (1) Commercial invoice (always required)—itemised list with prices, seller, buyer details. (2) Packing list—detailed contents, weights, dimensions. (3) Bill of lading or air waybill—carrier document showing shipment details. (4) Export declarations—UK Customs Declaration (SAD form or electronic equivalent) required for all goods leaving UK. (5) EORI numbers—both exporter and importer must have EORI (Economic Operator Registration Identification) numbers registered with Customs. (6) Product classification—goods must be classified using HS codes (Harmonized System); incorrect codes delay customs clearance. (7) Rules of origin—proving goods are UK/EU origin to qualify for trade benefits. Pre-Brexit, customs was handled at point of entry to EU; post-Brexit, you must clear customs in UK before goods leave. Procedures vary by good type (standard goods, hazmat, food, controlled items). Professional logistics firms have specialists handling this; as a distribution specialist, you need familiarity with documentation requirements and common delays (missing EORI, incorrect HS codes, incomplete invoices).

Order consolidation is combining multiple orders into fewer shipments to reduce per-shipment cost (one truck is cheaper than two). Optimisation strategies: (1) Consolidation windows—allow orders to accumulate for 4-8 hours before despatch, then consolidate and ship. This delays some orders slightly but reduces cost substantially. (2) Geographic clustering—consolidate orders going to the same region or last-mile carrier, minimizing handling. (3) Weight/volume utilisation—combine orders that pack efficiently together (light items with heavy items, various sizes). (4) Carrier selection—some carriers offer density incentives (lower rates per kg if weight utilises space well). (5) Deadline planning—consolidate orders with similar delivery deadlines; don't wait for urgent orders if consolidation extends their delivery. Cost-service trade-off: aggressive consolidation reduces cost but delays delivery; minimal consolidation keeps delivery fast but costs more. Most logistics firms balance with service level agreements (SLA)—e.g., "next-day for orders received before 3pm, 2-day for others." Balancing consolidation windows against SLAs prevents extending delivery while capturing cost benefits.

Key shipment metrics: (1) On-time delivery %—percentage of shipments delivered by promised date; target 95%+. (2) Damage rate—percentage of shipments arriving damaged; target <0.5%. (3) Shipment accuracy—percentage with correct items in correct quantities; target 99%+. (4) Cost per shipment—total logistics cost divided by shipments. (5) Fill rate—utilisation of vehicle capacity; target 85%+. (6) Variance %; variance in cost from budget. Track daily in WMS/TMS dashboards. Trends reveal problems: rising damage suggests poor packing or vehicle condition; on-time delivery drop suggests carrier reliability issues; accuracy drops suggest picking errors. Monthly reports break down by carrier, customer, or route. Example: if DHL on-time is 88% but average is 96%, investigate DHL—capacity issues? pricing incentives inadequate? These metrics drive operational decisions: persistent damage with Carrier A means switching to Carrier B; high cost per shipment with LTL suggests consolidating shipments to FTL. KPIs are the language management uses to evaluate logistics performance; you must track them accurately.

Lost or delayed shipment protocol: (1) Investigation—Immediately contact carrier with reference number, request tracking update. Determine if package is physically lost, misrouted, or in customs. (2) Root cause—Did you provide correct address? Was documentation incomplete? Did carrier miss pickup? Determine whose fault it is. (3) Customer communication—Inform customer of status, expected resolution timeframe. Apologise if your error, explain if carrier fault. (4) Replacement—If truly lost, arrange replacement shipment immediately (at your cost if your error, carrier's cost if theirs). Expedite replacement to mitigate customer impact. (5) Documentation—Keep records of investigation, communication, resolution for future reference and dispute resolution. (6) Preventive—Analyse root cause to prevent recurrence (if address data was wrong, improve validation; if carrier mishandled, escalate with carrier or switch). In e-commerce, lost packages damage customer relationships significantly; quick acknowledgement and replacement build trust even when things go wrong. Carriers have liability limits, so replacement shipments protect customer relationships even if carrier cost recovery takes weeks.

Hazmat regulations govern shipping of dangerous goods (chemicals, batteries, flammables, pressurised containers) and vary by transport mode: (1) Road (ADR)—dangerous goods transported by road must be packaged per specification, labelled with hazard diamonds, and transported by trained drivers with ADR certification. (2) Air (IATA)—more restrictive; many goods prohibited, strict packaging and documentation. (3) Sea (IMDG)—maritime hazmat; segregation requirements prevent incompatible goods being in same hold. Compliance steps: (1) Classification—identify if goods are hazmat using commodity codes and hazmat guidelines. Many shippers misclassify or underreport. (2) Packaging—use approved containers and cushioning specified for the hazard class. (3) Labelling—apply hazard labels to package showing hazard class. (4) Documentation—include shipper's declaration and safety data sheet (SDS). (5) Training—drivers and warehouse staff handling hazmat must be trained. (6) Carrier capability—confirm carrier holds required licenses and certifications for the hazmat class. Non-compliance is serious: you can be liable for damage, penalties, or safety incidents. Many 3PLs have specialists managing hazmat; as distribution specialist, you need awareness of requirements and responsibility to flag goods needing hazmat procedures to specialists rather than shipping as general cargo.